 |
Ultimate Motorcycle Performance Products and Services |
 |
|||
|
112 Henry St. - Schenectady NY 12304 518 346 - 7203 |
|||||
|
|
Ultimate Motorcycle Performance Products and Services |
|
|||
|
112 Henry St. - Schenectady NY 12304 518 346 - 7203 |
|||||
Line Bore engine cases for precision roller bearings
Machine engine cases for accurate chain alignment
Re-work transmission oiling system
Mounting all bushings, sleeves, seals and 4130 Moly sprocket on your output shaft
Includes 6061 billet outer support plate with weld plate
Includes 6061-T6 billet motor mount inserts to replace sloppy factory rubber inserts
Complete written instructions
(Due to clearance problems the stock V-max exhaust will not work - An after market header is required)
(We will need your empty engine cases and complete output shaft assembly)
Total = $849.00
PCW Racing utilizes a taper roller type pivot, like OEM, and uses all stock mounting hardware for our swingarms. There is a 30 lbs. Weight loss in most cases in the rear end alone.
Chrome Moly swing arm 0 - 2" over with Moly axle......................................................$625.00
Chrome Moly swing arm 3 - 5" over with Moly axle......................................................$700.00 (Rear body work modification is required with 3 - 5" long arm)
Hand made sheet aluminum "Sport Chain" swing arm ...................................................$995.00 (Your frame must be sent to our shop for pivot bolt installation)
Billet Chain Guard..........................................................................................................$69.95
Rear sprockets..............................................................................................................$60 and up
Frame Modification Kit with Delrin insert and detailed instructions (Frame cutting is required when installing a chain drive. It is a fairly simple mod and can be done by most fabrication shops, or you can send your frame to us) Kit with Delrin insert......................................................................................................$59.95
Drive Chains (with the amount of low end torque the V-Max produces, we suggest using only the finest chain on the market)
RK 530 DR (non o-ring) ...............................................................................................$145.95
RK 530 GRO (gold side plates) ....................................................................................$145.95
EK 530 RXO (available in chrome or gold side plates) ...................................................$189.95
Gas Tank Modification (Your gas tank must be modified to make room for the chain. Minimal capacity loss of only 1.6 quarts or 10% of the 4 US gallon total. There are many shops capable of doing this modification. If someone other than our shop does the modification, just make sure it is done in a professional manner).
Gas Tank Mod
...............................................................................................................$175.00
