Cylinder Head - Shop Labor
(rates are for labor only unless otherwise noted)
Install and rough cut oversized intake seats (included seats) (per head) = $ 180.00
Install and rough cut oversized exhaust seats (includes seats) (per head) = $ 180.00
Install over sized valves intake side (per head) = $120.00
Install oversized valves exhaust side (per head) = $120.00
Multi-angle valve job only (pair of heads) = $ 299.00
CC and balance chambers (per chamber) = $ 40.00
Cylinder head milling (per head) = $ 40.00
Remove and replace valve guides (each) = $ 8.00
Cam journal line boring and honing = call our sales desk
Flow bench testing (per hour) = $ 60.00
Engine Room Labor
Crank Work
Clean and mag crank = $ 40.00
Polish crank shaft journals = $ 40.00
Crankshaft rod journal repair ( mag, weld, grind and polish per journal) = $ 329.00
Crankshaft and rod assembly balancing (sending all pistons, pins, and rings) = $
219.95
Flywheel removal = $ 40.00
Stock connecting rods reworked (mag, shot peened, and bronze bushed) = $ 299.95
Additional Service and Machining
HD Starter Clutch Assembly = $ 179.95
Piston Flycutting (per piston) = $ 16.00
Piston gas porting (per piston) = $ 15.00
Degree camshafts (engine out of bike) = $ 150.00
Complete disassembly, cleaning, inspection and reassemble with dyno pulls = $ 950.00
Dyno time (per hour) = $ 70.00
Options and Accessories
Daytona Digital water temp gauge = $ 139.95
Daytona Digital oil temp gauge = $ 129.95
Carb Synchronizer with 5 mm adapters (mercury stick style) = $74.95
Oil pressure gauge with line and mounting kit = $ 124.95
Billet aluminum motor mount insert kit = $ 99.50 
Chain drive billet aluminum outer support plate with weld plate = $ 99.50
Super Cool Water Wetter ( 12 oz bottle) = $ 8.95
MSD shift light (needs chip listed below) =
$ 105.95
MSD shift light chip card (5 per card, 200 rpm increments 4000 to 13000) = $ 38.95
Spiro Pro ignition wires with ends (come in black, red, or blue) = $ 42.90
Fiberglass Tank Shell and Side Scoops (three piece set) = $ 169.95
